• Os X Version Mac
• Smart Card For Mac Os X 10.10
• Mac Os X Download
• Smart Card For Mac Os X 10.8
• Mac Os For Pc
• Smart Card Mac Os X

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTENAME FLAG VALUE WORST THRESH TYPE UPDATED WHENFAILED RAWVALUE 5 ReallocatedSectorCt 0x0033 100 100 010 Pre-fail Always - 0 9 PowerOnHours 0x0032 099 099 000 Oldage Always - 2379 12 PowerCycleCount 0x0032 098 098 000 Old. In the future, SMART also hopes to implement handwriting technology via the Inkwell features in Mac OS X 10.2 ('Jaguar'). For more info on SMART products, see our June 19 report. Acsccid is a PC/SC driver for Linux/Mac OS X and it supports ACS CCID smart card readers. This library provides a PC/SC IFD handler implementation and communicates with the readers through the PC/SC Lite resource manager (pcscd). Acsccid is based on ccid. See CCID free software driver for more information. Free download Card Reader Card Reader for Mac OS X. Card Reader allows you to use Palm-powered handhelds (Palm Centro, Palm Treo, Sony CLIE and other Palm pda's) as an ordinary USB or Bluetooth card reader for quick and easy file exchange. Smart Card CCID (LGPL v2.1 licensing) TokenD (APSL v2 licensing) There are frequently early builds of sub-projects posted and available for your testing and development, so keep checking and keep active! Read the Smart Card Services documentation. Getting Involved. Subscribe to our mailing lists to discuss Smart Card Services.

Os X Version Mac

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS do you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X.

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

Smart Card For Mac Os X 10.10

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry

• 4Driver for readers
• 5Install Smart Card driver

General

In several places in this instruction you have to run a command in Terminal. You can start Terminal from Applications/Utilities or you can write Terminal in Spotlight.

The text writen this way are commands, which you have to run in Terminal. You dont have to write them just copy them with the clipboard. To work correctly commands which starts with sudo,is nessesary for you to have a password for the user. If you don't have set a temporary one during the settings. After you use one of the commands you will be propted for password.

What is nessesary to work with digital signature

In order to use your digital sigature is nessesary to install the driver for the smart card reader, the middleware for the smart card and the service for smart card resders (pcscd) running. The service pcscd must start automatically when you plug a reader.

System requerments

The software requered to work with certificates on Mac, supports Mac OS X 10.5 or newer.

Support for 10.5 is paritial. All needed drivers work on 10.5 but InfoNotary software for signing of documents and card management does not.

Driver for readers

ACR 38C

If the your reader is labeled with ACR38C-SPC-R at the bottom, have a sign SIMLector 38T on the inside or a sign mLector-S, then your device works with the build in driver in the OS and you don't have to install any drivers.

ACR 38U

Reader that are labeled ACR 38U,are not compatible with this driver, so if you use such a device you have to install driver from the site of the manifactorer.

Omnikey (HID Global)

For you to use OmniKey CardMan, you have to install the driver from HID Global for your version of OS X:

• Driver for 10.6 - 10.10.
• Driver for 10.11 El Capitan.

After update of the OS X you have to install the drivers again.

Bit4id miniLector-S

Mac Os X Download

If your reader is labeled with miniLector-S you must install this driver -driver for miniLector-S for OS X from 10.6 to 10.9 inclusive.

In OS X 10.10 Yosemite this readder is supported by Apple driver, so there is no need to install another driver.

Todos

To use Todos Argos Mini II you have to install the driver. Depends on what version of Mac OS X you use install the following:

Install Smart Card driver

Depend of the model of your card you have to use different software. The model of the card is on the Personal Access Rights, which you receive with your card. In case your model is „T&S DS/2048 (L)“, you have to install Bit4id Universal Middleware from you installation CD. If the model is „CardOS V4.3B (C)“, you have to install OpenSC.

Incase you dont have Personal Access Rights, you can check your card model with this command pcsctest from terminal. She will ask you for the reader number, you have to press 1. If there is no problem with the reader installation you will get a row beginning with „Current Reader ATR Value“. Against this text is an indetifier for the card.

• For T&S DS/2048 the indentidier is „3B FF 18 00 FF 81 31 FE 55 00 6B 02 09 03 03 01 11 01 43 4E 53 11 31 80 8C“.
• For CardOS V4.3 the indentidier is „3B F2 18 00 02 C1 0A 31 FE 58 C8 08 74“.

Installation of Bit4id Universal Middleware

To use Bit4id on Mac OS X, you must install Bit4id Universal Middleware. You can find it on the installation CD, in folder Install/MacOSX. to work with Firefox и Thunderbird, you have to install Bit4id Cryptoki Libraries 1.2.12.pkg, and for integration with the OS and the other programs for Mac OS X - bit4id-tokend-ts-en-1.2.9.0.pkg.dmg.

In case you have to register the PKCS#11 module на Bit4id in a program different from Firefox, Thunderbird or InfoNotary Smart Card Manager you have to specify a path - /System/Library/bit4id/cryptoki/libbit4ipki.dylib.

After the installation continue with configuration Firefox or Safari.

Note: In case you didn't receive a CD or your laptop doesn't have a CD drive, please write to support@infonotary.com , and we will send you the drivers.

Download and install OpenSC

To use your certificate on OSX you must install OpenSC. With OpenSС you dont install any program with graphic interface so you wont find anything in Applications. You can download the latest version for your OS from here:

• For Mac OS X 10.9 and newer.
• For Mac OS X 10.8.
• For Mac OS X 10.7.
• For Mac OS X 10.6.
• For Mac OS X 10.5.

In case you have to register the PKCS#11 module на Bit4id in a program different from Firefox, Thunderbird or InfoNotary Smart Card Manager you have to specify a path - /Library/OpenSC/lib/onepin-opensc-pkcs11.so.

After the installation continue with configuration Testing Installation or Firefox and Safari.

Use both OpenSC and Bit4id Universal Middleware

In case you want to use both OpenSC and Bit4id Universal Middleware on the same computer you have to forbid OpenSC to access T&S DS/2048 smart cards. The easiest way to do it is to use following program:

Disable Bit4id cards in OpenSC.

If you prefer to do it manually you can find instructions on OpenSC page.

Testing Installation

Smart Card For Mac Os X 10.8

If you have problem using your certificate, you can run the following program to identify it:

It can send information directly to us. After report is accepted, it will show nine digit number, that can be used by our support team to see test result. If you do not have Internet connection or direct sending failed, you can save report and send it to support@infonotary.com.

Reader and card should be connected to the computer when test program is started.

Uninstall

OpenSC can be uninstalled with this program - OpenSC uninstaller.

Mac Os For Pc

Bit4id Universal Middleware can be uninstaled, by running the program Uninstaller from the folder /System/Library/bit4id.

Smart Card Mac Os X

Documentation

Documentation for OpenSC is available on Internet or in folder /Library/OpenSC/doc/ after the installation.

On the page Working with OpenSC you can find instruction for th most common operation with OpenSC.